How to Refill Your Pod Cleanly (and Avoid Leaks)

Category: How-To · 4 min read

Most "leaking pod" problems happen during refilling. Here's a simple routine for a clean fill every time.

What You Need

• Your pod (e.g., Aero Replacement Pod)
• E-liquid in a bottle with a narrow nozzle
• A paper towel

Step by Step

1. Remove the pod from the device. Never fill it while attached to the battery.
2. Hold it at a slight angle with the fill port facing up.
3. Open the fill plug gently. Don't pull it off completely.
4. Aim at the side wall, not down the central chimney. Liquid in the chimney ends up in your mouth or the device.
5. Stop at the max line. Leave a little air space; overfilling is the No.1 cause of leaks.
6. Close the plug firmly and wipe away any drops.
7. Wait 5 minutes if the coil is new, so the cotton fully saturates.
8. Dry the contacts at the base before clicking the pod back in.

Extra Tips

• Refill before the pod runs fully dry to avoid dry hits.
• Store your device upright, especially when travelling.
• Take gentle puffs at first; hard, rapid pulls can flood the coil.
• Changes in air pressure (like on flights) can push liquid out, so carry the pod half full.
• Replace pods when flavor dulls or the coil tastes burnt, usually every 1–2 weeks.

Still Leaking?

Check for cracks, a damaged seal or a loose fill plug. If your pod arrived faulty, email support@cloudora.com within 7 days of delivery.

For adults 21+ only. This product contains nicotine, which is addictive.